Articles | Volume 8, issue 2
https://doi.org/10.5194/jsss-8-285-2019
https://doi.org/10.5194/jsss-8-285-2019
Regular research article
 | 
24 Sep 2019
Regular research article |  | 24 Sep 2019

Close-to-process strain measurement in ultrasonic vibration-assisted turning

Simon Kimme, Nessma Hafez, Christian Titsch, Jonas Maximilian Werner, Andreas Nestler, and Welf-Guntram Drossel

Related subject area

Measurement systems: Sensor-actuator systems
Acoustophoresis in suspensions with local and time-discrete sound fields based on the time reversal technique
Philipp Hörnlein, Sebastian Wöckel, Hendrik Arndt, and Jörg Auge
J. Sens. Sens. Syst., 11, 117–128, https://doi.org/10.5194/jsss-11-117-2022,https://doi.org/10.5194/jsss-11-117-2022, 2022
Short summary
Adjustment concept for compensating for stiffness and tilt sensitivity of a novel monolithic electromagnetic force compensation (EMFC) weighing cell
Markus Pabst, Maximilian Darnieder, René Theska, and Thomas Fröhlich
J. Sens. Sens. Syst., 11, 109–116, https://doi.org/10.5194/jsss-11-109-2022,https://doi.org/10.5194/jsss-11-109-2022, 2022
Short summary
Development and test of a highly sensitive and selective hydrogen sensor system
Pramit Sood, Jens Zosel, Michael Mertig, Wolfram Oelßner, Olaf Herrmann, and Michael Woratz
J. Sens. Sens. Syst., 9, 309–317, https://doi.org/10.5194/jsss-9-309-2020,https://doi.org/10.5194/jsss-9-309-2020, 2020
Short summary
Integrated defect sensor for the inspection of fiber-reinforced plastics using air-coupled ultrasound
Yannick Bernhardt and Marc Kreutzbruck
J. Sens. Sens. Syst., 9, 127–132, https://doi.org/10.5194/jsss-9-127-2020,https://doi.org/10.5194/jsss-9-127-2020, 2020
Short summary
A mobile nondestructive testing (NDT) system for fast detection of impact damage in fiber-reinforced plastics (FRP)
Johannes Rittmann, Markus Rahammer, Niels Holtmann, and Marc Kreutzbruck
J. Sens. Sens. Syst., 9, 43–50, https://doi.org/10.5194/jsss-9-43-2020,https://doi.org/10.5194/jsss-9-43-2020, 2020
Short summary

Cited articles

Arnold, F. and Mühlen, S.: The resonance frequencies on mechanically pre-stressed ultrasonic piezotransducers, Ultrasonics, 39, 1–5, https://doi.org/10.1016/S0041-624X(00)00047-0, 2001. a
Babitsky, V. I., Astashev, V. K., and Kalashnikov, A. N.: Autoresonant control of nonlinear mode in ultrasonic transducer for machining applications, Ultrasonics, 42, 29–35, https://doi.org/10.1016/j.ultras.2004.01.004, 2004. a
Brehl, D. E. and Dow, T. A.: Review of vibration-assisted machining, Precis. Eng., 32, 153–172, https://doi.org/10.1016/j.precisioneng.2007.08.003, 2008. a, b
Gallego-Juárez, J. A. and Graff, K. F. (Eds.): Power ultrasonics: Applications of high-intensity ultrasound, in: Woodhead publishing series in electronic and optical materials, vol. 66, Elsevier/WP Woodhead Publ, Amsterdam, 2015. a, b
Huang, Y. M., Wu, Y. S., and Huang, J. Y.: The influence of ultrasonic vibration-assisted micro-deep drawing process, Int. J. Adv. Manuf. Tech., 71, 1455–1461, https://doi.org/10.1007/s00170-013-5553-1, 2014. a
Download
Short summary
Vibrations in the manufacturing process are usually undesirable. However, vibrations in the ultrasonic range can be used to enhance process variables such as forces, wear or the machined surface. Thus far, it has not been possible to detect vibrations close to the process. This prevents a stable setting of vibration parameters. By measuring strains in the tool, conclusions about the shape and magnitude of vibrations could be drawn, enabling process-oriented measurements during turning.